Kantronics KPC–3 Plus User Manual

Also see for KPC-3 Plus: User guide User guide Manual

Contents

Kantronics KPC–3 Plus User Manual Manual pdf 59 page image

59MONITOR - When ON allows the KPC-3 Plus to display monitored packets on thescreen. When OFF, no packets will be displayed unless someone actually connects toyou.MHEARD - Displays a short list of stations that have recently been heard by yourKPC-3 Plus.MYCALL - Used to set the callsign of your KPC-3 Plus.MYPBBS - Sets the callsign used for your personal mailbox in the KPC-3 Plus.PBBS - Used to set the size (kbytes) of the Personal BBS in your KPC-3 Plus.RESET - Causes the KPC-3 Plus to perform a soft reset.STATUS - Displays the status of the current stream and all connected streams.TXDELAY - Sets the time delay between Push-to-Talk and the beginning of data.UNPROTO - Sets the destination field and digipeaters used for any unconnected datapackets transmitted.VERSION - Displays the current version number of the EPROM (firmware) in yourKPC-3 Plus.Using NEWUSER CommandsA brief look at the use of selected NEWUSER commands will give you the familiarityyou need to continue on your own using KPC-3 Plus commands.Check Your KPC-3 Plus’ Version Number and IDTo check your KPC-3 Plus‘ version number and ID all you need to do is ask to see thecurrent setting of the command called VERSION:Step 1. Go to COMMAND mode (if you are not already there).Step 2. Type ―VERSION‖ (or the short form, ―V‖) and press the ENTER key to enterthe command.Step 3. The KPC-3 Plus will send its version number and other ID information fordisplay on your monitor.Get HelpTo see a one-line explanation of any command that is currently available:Step 1. Go to COMMAND mode (if you are not already there).Step 2. Type ―HELP,‖ (or ―?‖) followed by one or more spaces and the name of thecommand for which you want help.

/ 236

This manual is suitable for:

KPC-3 Plus

Kantronics KPC–3 Plus User Manual

Product

Learn More

Legal