18serve as a digipeater for other stationsserve as a network node point for other stations, using KA-NODE and/or theoptional K-Net featureAnd much more.Package ContentsCheck to see that you have the items listed below (later you will see how these itemsare used in your system):KPC-3 Plus unitparts to use in assembling cablingMale DSUB-9 connector for radio portMetalized DSUB-9 back shell with hardware3 foot (0.91 m) piece of 5-conductor shielded cable to connect the KPC-3Plus to your radio2.1 mm dc power connectorand, of course, this ―User‘s Guide‖ manual on a CD-ROMAdditional Parts for Your Packet Radio StationIn addition to your KPC-3 Plus unit, you will need the following parts to set up yourpacket radio station:An FM transceiverA microphone (Mic) plug and/or mating accessory plug or external audio plug foryour radioA computer with an RS232 serial port (or other RS232 terminal device)A serial modem cable, used to connect the KPC-3 Plus to your computerA 12 V dc power supply or power adapter(optionally) 9 V battery and battery clip (not supplied, you must install)
