111The long (JHEARD L) version of this command will also show the destination field andany digipeaters used.Nodes [Short|Long]Causes the node to return a list of KA-Nodes it has heard, as well as K-Net, G8BPQ,NET/ROM and TheNet nodes. The format of the list is similar to that of the JHEARD listabove.Xconnect callsignNote: The Xconnect callsign command is available only in KA-nodes in Kantronics‘multi-port TNCs.Causes the node to issue a connect request to ―callsign‖ (in the usual AX.25 format) onthe opposite port of the KA-Node. Cross connecting enables you to gain access, via thenode, to another frequency.
