Kärcher 550.0 Operator's Manual

Kärcher 550.0 Operator's Manual Manual pdf 9 page image

9.800-079.0 • Rev. 05/149PRESSURE WASHER OPERATOR’S MANUALSafetyLatchOPERATING INSTRUCTIONSSTEP 7: Turn the engine to "Run" position. STEP 8: Pull the starter grip. If the engine fails to startafter 2 pulls, squeeze the trigger gun to release pressureand repeat step. Return starter gently. After the enginewarms up enough to run smoothly, move choke to runposition and throttle to fast position.CAUTION: Small engines may kick back. Do not holdpull starter grip tightly in hand.WARNING! Never replace noz-zles without engaging the safetylatch on the spray gun trigger.The four color-coded quick connectnozzles provide a wide array ofspray widths from 0° to 40° and areeasily accessible when placed inthe convenient rubber nozzle holder,which is provided on the front of themachine.NOTE: For a more gentle rinse,select the white 40° or green 25°nozzle. To scour the surface, selectthe yellow 15° or red 0° nozzle. Toapply detergent select the blacknozzle.NOZZLESThrottleTemperatureGaugeBurnerSwutchSTEP 9: If hot water is required.Adjust temperature gauge to propertemperature (200°). Turn on Burnerswitch to begin heating water.Selection of high or low pressure is accompanied byturning the handle. NOTE: High pressure nozzle mustbe inserted at end of wand to obtain high pressure. Toapply soap read operator's manual.Variable PressureControl HandleTriggerVariable PressureWand (VP)HighPressureNozzleBrass SoapNozzle