JVC LST0728-001C Instructions Manual

Contents

17J [SEARCH] ButtonDisplays the date and time search screen when in the playbackmode. (A Page 40)K [KEY] ButtonWhen [KEY] button is pressed while pressing [FUNCTION] button,key operation on front panel will be disabled. (Key locked mode)To disable, perform same procedure again.Press to display or hide the Asoftware keyboardB.Memo :● Use the software keyboard to input characters. (A Page 28)L [ALARM CLEAR] ButtonClears the [ALARM] display when an event occurs or motion isdetected. Press and hold this button to turn off the [WARNING]indicator.Press the [FUNCTION] button, [ALARM CLEAR] button and the[SELECT] button at the same time to reboot the NVR Viewer as wellas the internal distribution server.M [REC/STOP] ButtonPress to start recording in all cameras. (When the recording controlmode is turned on, recording on all cameras starts after turning offthe recording control mode. ) Press and hold down to stoprecording.When in the recording control mode, press and hold this button toexit the recording control mode.Memo :● Recording will not be started in cameras to which no videosignal is being input.● The manual recording mode executes recording from allcameras regardless of the settings in the [Camera RecordSetting]. Recording is carried out in accordance with the framerate selected in [Camera Record Setting]. (A Page 83)N [STOP(PB)] ButtonStops playback when you press this button in the playback mode.O [PLAY] ButtonPlays back at the speed and in the direction specified by the ShuttleDial position.P [SKIP] Button [S]Press to move the item selection in the reverse direction in themenu or settings screen. Jumps to the beginning of the previoussequence on the selected camera when you press this button in theplayback mode. Press and hold it to jump to the first image in thedatabase of the selected camera. [T]Press to move the item selection in the forward direction in themenu or settings screen. Jumps to the beginning of the nextsequence on the selected camera when you press this button in theplayback mode. Press and hold it to jump to the last image in thedatabase of the selected camera.Memo :● “Sequence” indicates a certain block of images that are recordedduring motion detection.● Recorded images are stored in the database. “Database” refersto data recorded in this unit.Q Jog dialPlays back a single frame when it is rotated in the playback mode.R Shuttle dialThe position of the dial specifies the playback speed and playbackdirection when in the playback mode. Playback speed is selectablefrom x 1/20, x 1/5, x 1, x 2, x 5, x 10 and x 20 according to theangle.S [REC] IndicatorLights up during recording. Flashes during EMERGENCY or EXTREC IN recording.T Center panelDo not remove the cover.U Keypad buttons/Indicator[0] to [9]Selects the camera input when viewing live images and whenplaying back recorded images.The indicator that corresponds to the selected camera input lightsup during camera selection mode.Used to move the camera to the specified position during PTZmode, to enter the preset number during PRESET mode and tonarrow down the search date, month, week and time in the searchmode. You can move the mouse cursor when the software keyboardis displayed. When the main menu is displayed, press the [2/D] or[8/E] button to move the option highlight. These buttons are alsoused as numeric keys.V [LIVE/BROWSE] Button/IndicatorSwitches between the [Live] mode and [Browse] mode.The indicator lights up when in the [Live] mode.Pressing the [LIVE/BROWSE] button when the wallpaper screen isdisplayed shows the [Live] screen.Press and hold the [FUNCTION] button, and press and hold the [LIVE/BROWSE] button at the same time to log out of the system.Press the [FUNCTION] button, [ALARM RESET] button and the[SELECT] button at the same time to reboot the NVR Viewer as wellas the internal distribution server.Memo :● When [Auto Logon] is enabled, the login operation startsautomatically immediately after logging out. (A Page 69 [UnitSetting 1])