JVC LST0728-001C Instructions Manual

Contents

129This feature plays back a specific audio file from the designateddestination on the camera or this unit when a generic eventregistered with this unit is triggered or when alarm signals are inputto the rear terminal. The Event Audio Settings screen enables youto configure the above setting as well as other settings related tothe event audio feature.1 Select [Event Audio Setting] from [Main Menu]● The [Event Audio Setting] screen appears.Event Audio Settings(VR-N1600U/E)Item DescriptionA Event A list of events that can be used with theevent audio are displayed.You can use up to a maximum of 100 events(including both [External Alarm Terminal] and[Multi Mode]). [Generic Event] that has beenconfigured on the [Camera Record Setting]screen, [External Alarm Terminal] on the rearpanel of the VR-N1600U/E unit, as well as[Multi Mode] are displayed.Memo :● After setting an event for the externalalarm terminal of VR-N1600U/E, do notdelete the A[NVR](127.0.0.1)B audio inputof the main unit in [Camera RecordSetting]. Doing so clears the settings.B ConditionalexpressionThe conditional expression of the [GenericEvent] selected in the [Event] item A isdisplayed.C Renew Updates the current settings of the eventaudio feature, and closes the [Event AudioSetting] screen.D Cancel Cancels all settings and closes the [EventAudio Setting] screen.Memo :● The password at the receiving endspecified on the [Password] screencannot be canceled.A BCDEFGHItem DescriptionE Audio files For specifying the audio file to play back andnumber of playbacks when an event istriggered.Specify the number of playbacks betweenA1timesB and A10timesB. You can also selectcontinuous playback to enable infinite loopplayback. Leave the field blank if you do notwant to designate a playback audio file for aspecific event.F StartButton ontheDifferentPages[Audio files copy] Button:Starts up the [Audio file utility] screen.(A Page 130)[Setting copy] Button:Starts up the [Setting copy] screen.(A Page 131)[Password setting] Button:Starts up the [Password setting] screen.(A Page 131)[Communication setting] Button:Starts up the [Communication setting]screen. (A Page 132)G Audioplaying for/IPaddressDisplays a list of cameras or IP addressesthat are used as destinations of audioplayback files.Select a destination to play back audio fileswhen an event is triggered from the list.Select the check box of the camera to playback audio sound.You can sort the list accordingly by clicking[Audio playing for] or [IP address].H Push ToTalkPush to Talk is a feature that enablestransmission of audio sound to a camera thatsupports bidirectional audio when themicrophone button is pressed down (whenMake signal is input to the [ALARM IN]terminal of this unit). (A Page 20)To use this feature, select the external alarmterminal on the rear panel of theVR-N1600U/E unit.Leave this blank if you are not using the[Push To Talk] feature.The action that is associated with the[ALARM IN 1 to 8] terminals configured onthe [Camera Record Setting] screen aredisabled when the [Push To Talk] feature is inuse. (Only alarm input of the selectedterminal is disabled. Actions of terminals thatare not selected remain valid.)[Input/Output Terminal on Rear Panel](A Page 97)