1451 Click [HDD Utility] under [Main Menu](A Page 116)● The [HDD Utility] screen appears.2 Click [Details]3 Enter the [User name] and [Password] that areconfigured on the NAS device for access to NASin [NAS User Settings], and click [Set]4 Enter the IP address and shared name of theNAS device in the format of A IP Addressshared nameB in the [Address] field under [NASDrive], followed by clicking [Add]Example)5 If the NAS device is the only device forrecording images, deselect the [Enablearchiving to internal HDD] check box6 Click [Close]7 Click [Main Menu]-[Camera Record Setting]-[Archive Setup...] (A Page 108)● The [Archive Setup] screen appears.8 Deselect the [Automatic path selection] checkbox9 Configure each drive as destinations for storingimages of the respective cameras.Note :● Performing the above setting only after the NAS device setting iscomplete and when the device is connected to the network.● If you change the archive destination after applying the setting,playback of previously archived data will fail.● The configurable items may differ according to the camera inuse.● Specify the user name with a different name from the [OSSetting] (A Page 73) host name under the user setting for NASconnection.Note :● After configuring the NAS drive, an error message will appear onthe NVR Viewer for several minutes, and live images may not bedisplayed during this interval.Configuring NAS192.168.0.20023456[HDD Utility] Screen8[Archive Setup] Screen
