JVC DR-MX1SEF Instructions Manual

Also see for DR-MX1S: Instructions Instructions Quick start guide Gebruiksaanwijzing

Contents

EN 39BASIC OPERATIONS ON DVD DECKSetting The Progressive ModeYou can obtain optimal picture quality by selecting whether thecontent on the disc is processed by field (video source) or by frame(film source).1 Set the unit to the progressive scan mode. ( pg. 83)2 Press ON SCREEN twice to access the on-screen bar.3 Press w e to select “ ”, then press ENTER. The pop-upwindow appears under the selected item.4 Press rt to select the desired option, then press ENTER.AUTO: This mode automatically detects film and video content forprogressive playback. When film content is found, flag detectionis used to invoke playback of film data in full screen. When videocontent is found, pictures from multiple fields are used to detectsections with movement, and then this movement undergoesadvanced image processing for output of sharp, detailedprogressive images without any reduction in image quality wheremovement occurs. Normally, operation in this mode isrecommended.FILM: Suitable for playing back a progressive scanned film sourcedisc.VIDEO: Suitable for playing back a video source disc. The outlineson the played back pictures will be soft.To clear the on-screen barPress ON SCREEN.Program PlaybackYou can program up to 30 tracks (Video CD/SVCD or Audio CD) toplay back in the desired order.While stopped1 Press ON SCREEN twice to access the on-screen bar.2 Press w e to select “PRGM”, then press ENTER. The programtable appears under on-screen bar.3 Press the number keys toenter the track numbers in thedesired order.Examples:A To select track 5, press thenumber key “5” and ENTER.B To select track 15, press thenumber key “1” and “5”.C To select track 25, press the number key “2” and “5”.If you have specified a wrong selectionPress CANCEL (&). The last selection is erased.Or press CLEAR (8). The whole selection is erased.4 Press 4. Playback starts in the programmed order.● When all of the programmed tracks have been played back, ProgramPlayback stops, but the programmed information remains.● To add tracks to the end of the program, perform steps 1 through 3.● During Program Playback, pressing 6 skips to the next selectionof the program. Pressing 2 returns to the beginning of the currentselection.To clear the on-screen bar and the contents of the programPress ON SCREEN.To cancel Program PlaybackPress w e to select “PRGM”, then press ENTER.NOTE:Program Playback is not possible depending on the type of disc.Random PlaybackYou can play back all the tracks on the disc in random order.While stopped1 Press ON SCREEN twice to access the on-screen bar.2 Press w e to select “RND”, then press ENTER. Playback startsin random order.To clear the on-screen barPress ON SCREEN.To cancel Random PlaybackPerform steps 1 and 2.NOTE:The same track will not be played back more than once during RandomPlayback.Select The Switching Interval Of The Slide ShowYou can control the switching interval of the slide show.1 Press ON SCREEN twice to access the on-screen bar.2 Press w e to select “ ”, then press ENTER. The pop-upwindow appears under the selected item.3 Press rt to select the desired option, then press ENTER.● Each time you press rt, the interval changes as follows:5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. {30 SEC. { (Back to the beginning)To clear the on-screen barPress ON SCREEN.NOTE:JPEG files are played back as a slide show. It may take more time todisplay an image with larger file size.CHAPTER 99 EACH 0:00DVD-VIDEOTITLE 993D-ON CINEMA AUTOTRACK 99 EACH 0:00VCDCINEMATRACK 99 EACH 0:00VCDCINEMATRACK 99GROUP 995 SEC.JPEG