JVC 0402-Ki-NV-JMT Instruction Manual

11/ buttonWhen you are viewing a bilingual broadcastprogramme, you can choose the sound fromBilingual I (Sub I) or Bilingual II (Sub II). Whenthe stereo broadcasting is received poorly,you can change from stereo to mono soundso that you can hear the broadcast moreclearly and easily.Press the / button tochoose a sound mode.: Stereo sound: mono sound: Bilingual I (sub I): Bilingual II (sub II)MONO : Cancels the Multi Sound function,and the sound becomes monaural.• The sound mode you can choose differsdepending on the TV programme.• This function does not work in the VIDEOmodes.DISPLAY buttonYou can display the PR LIST, programmenumber or VIDEO terminal number on thescreen.Press the DISPLAY button.Press the DISPLAY button changes thedisplay as follows:Remote control buttons and functionsChoose a TV channel or aVIDEO terminal1 Press the DISPLAY button todisplay the PR LIST.2 Press the / and / buttonsto choose a programme numberor VIDEO terminal.Then press the MENU/OKbutton.• For programme numbers with theCHANNEL GUARD function set, the(CHANNEL GUARD) mark is displayednext to the programme number in the PRLIST.• The VIDEO terminals are registered afterthe programme number PR99.COLOUR SYSTEM buttonThe colour system is chosen automatically.However, if the picture is not clear or nocolour appears, choose the colour systemmanually.Press the COLOUR SYSTEM buttonto choose the appropriate coloursystem.AUTO :This function detects a colour system fromthe input signal.• The AUTO mode may not functionproperly if you have poor signal quality.If the picture is abnormal in the AUTOmode, choose another colour systemmanually.• The AUTO mode detects a colour systemfrom the input signal and chooses theappropiate colour system automatically.• When changing the COLOUR SYSTEM ofthe SUB-picture, see "Change the coloursystem of the SUB-picture" on page 15for details.PR IDAV010203040506070809+10-101PR LISTNo indication:EXIT:OKOKTV