Husqvarna AUTOMOWER 430X Operator's Manual

Also see for AUTOMOWER 420: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

For more information about the operating modesStart, Park andPause, seeOperation on page35.3.9.2.2 MapThe map shows the current position of theproduct and the set centerpoint (origin) forGeoFence.3.9.2.3 Settings in Automower® ConnectThe product has factory settings butthe settings can be adapted to eachwork area.Most of the settings in the Automower®Connect app can be set in the displayof the product. Refer toTo do theproduct settings on page 24. Some ofthe settings can only be set inBluetooth® short-range distancebecause of security.3.9.2.4 MessagesIn this menu the previous fault and informationmessages can be found. For some of themessages, there are tips and advice to help torectify the fault.Note: TheMessages menu is only available forBluetooth® short-range connectivity.3.10 To do the product settingsThe product has factory settings but the settingscan be adapted to each work area.3.10.1 To get access to the menu1. Push the STOP button.2. Enter the PIN code on the keypad.3. Push the MENU button.3.10.2 To do the timer settings3.10.2.1 To calculate the timer setting1. Calculate the dimension of your lawn in m2 /yd2.2. Divide the m2 / yd2 of the lawn with theapproximate operation capacity. Refer totable below.3. The result is equal to the number of hoursthat the product must operate each day.Note: The operation capacity is approximate andtimer settings can be adjusted.Model Approximate operationcapacity, m2/h / yd2/hAutomower® 420 90 / 107Automower® 430X 135 / 161Automower® 440 165 / 197Automower® 450X 205 / 245Example: A lawn of 500 m2 / 600 yd2, cut with aAutomower® 420.500 m2 / 90 ≈ 5.5600 yd2 / 107 ≈ 5.5Days /weekh / day Timer settings7 5.5 07:00 - 12:30 / 07:00am - 12:30 pm3.10.2.2 To set the timer1. Do steps 1–3 inTo get access to the menuon page 24.2. Use the arrow buttons and the OK button tomove through the menu structureTimer >Overview Timer settings.24 - Installation 1201 - 001 - 05.06.2019