Honeywell Galaxy 8 User Manual

Also see for Galaxy 128: User guide User guide Programming manual

Honeywell Galaxy 8 User Manual Manual pdf 19 page image

Galaxy 8/18/60/128/500/504/512 User Guide13The entire LOG can be printed out by selecting key 3. The print-outconsists of up to 1000 events depending on panel type, and detailsthe time and date of setting, unsetting and alarms.ALLAll the options (CODES , ZONES, and LOG) can be printed out byselecting the ALL option. Pressing key 4 delivers a print-outstarting with user codes.HELP MESSAGEIf a print-out is started without a printer being connected and on-line,the display indicates that the printer is off-line.WALK TEST (User Level 5 and above)PURPOSEThe WALK TEST option provides a method of testing the zones toensure that they are operating correctly. There are two optionsavailable:1. All zones can be tested2. Selected zones can be testedIn both cases the sounder indicates an open zone. The test is recordedin the log.SELECTING WALK TESTEnter the QUICK MENU. Press the key 6 followed by the ent key.When WALK TEST is selected, TEST ALL ZONES or SELECTEDZONES displays.ALL ZONESChoosing ALL ZONES (press key 1) starts the test immediately. Noselection is necessary as all valid zones are included in the test. Thesounder operates whenever a zone is opened and stops when allzones are closed.Note: The TEST ALL ZONES option only tests zones which canbe omitted from the system.SELECTED ZONESChoosing the SELECTED ZONES option by pressing key 2 displays0 = OMIT ZONES[ent] to Select66 = Walk Testent to selectentPIN + ent1=TEST ALL ZONES2=SELECTED ZONES1NO ENTRIESWALK TEST ACTIVEESC to abort1001 FINAL#=TEST ENT=START2>A1002 EXIT#=TEST ENT=START1002 EXITTEST ENT=START#ent