Honeywell Galaxy 8 User Manual

Also see for Galaxy 128: User guide User guide Programming manual

Honeywell Galaxy 8 User Manual Manual pdf 18 page image

User Guide Galaxy 8/18/60/128/500/504/51212The # key can be used to reveal additional information on some typesof events. This information is displayed on the bottom line. Theinformation includes details such as zone descriptors, user levels andwhich keypad was used.SELECTING A DATEHold down one of the view keys, the dates held in the log are rapidlystepped through. The A> key moves forward through the dates and the moves backwards. Stopping at the required date reveals the firstevent for that date.VIEWING EACH EVENTThe entire events of any one date can be viewed by progressivelystepping through the events using the A> and view keys.* If the user has group choice enabled, the groups will display.Events for each group can be displayed by entering the group number.Printer off-lineEscape to abortrelease 16:31 SUN 20 NOVFULL SET USR 9816:31 SUN 20 NOVKOO L6 A1-------#esc*Print0 = OMIT ZONES[ent] to Select55 = PRINT[ent] to SelectPIN + ententPRINTING CODESESC to abort1=CODES 2=ZONES3=LOG 4=ALL1PRINTING ZONESESC to abortPRINTING LOGESC to abort3PRINTING ALLESC to abort42PRINTINGIf a serial printer is connected to the system, a system history can beprinted by pressing the T key. The system will print from the event ondisplay until the most recent event.PRINT (User Level 4 and above)PURPOSEThe PRINT option gives the user the opportunity to get a hard copyprint-out of the system details. This option requires a serial printer tobe connected to the system.SELECTING PRINTEnter the QUICK MENU. Press key 5 followed by the ent key. Thesystem print options are displayed. Pressing the esc key aborts thePRINT option.CODESPress key 1 to start the print-out of all the codes, giving the usernumber, name, level and length of code.ZONESSelect the ZONES option to print-out the details of each zone in thesystem. The zone address, function, and descriptor is printed. Presskey 2 to select this option.LOGADDITIONAL INFORMATION