Honeywell Galaxy 8 User Manual

Also see for Galaxy 128: User guide User guide Programming manual

Honeywell Galaxy 8 User Manual Manual pdf 27 page image

Galaxy 8/18/60/128/500/504/512 User Guide21• GROUP CHOICEUsers can be allocated to more than one group, but also have the choiceof which of the allocated groups to view, set or unset. Pressing * keywhile assigning groups to the user assigns the group choice feature.Notes: 1.The manager has fixed access to all system groups. Thiscannot be reprogrammed.2.The manager is assigned group choice by default, but thefeature can be removed.3.Users authorised to access the Codes option can only assigngroups that have been assigned to their user code. A user whodoes not have access to group 4, cannot assign group 4 toanother user code.MAX NUMBEREach MAX card has a unique 10 digit number laser etched onto it. AMAX card is assigned to a user by entering this number in the MAX Nooption. The number identifies the MAX card to the system and refer-ences it to the user it has been assigned to.Each MAX Number defaults to 0000000000 (ten zero’s):1. Press and hold the B key until the zeros are deleted.2. Enter the unique 10 digit number which is laser etched onto theMAX card.3. Press the ent key to save the programming and return to the previousmenu.Note: A MAX number can be assigned to a user code that does nothave a PIN allocated to it. All other options for this user are valid for theMAX card. It is recommended that MAX numbers should be assigned tousers not requiring a PIN at the MAX USERS menu option.When a MAX number has been assigned to a user number, a lower case(m) is displayed on the top line of the user number details screen.entÖGroups B 1_______Ú23_____>B88 = CODES[ent] to SelectPIN + ententCODES1 = User Codesent[ent] to Select1 = Modify PINentMAX No>0000000000001 USERL3 A ________ent7[ent] to Select7 = MAX Noent0 = OMIT ZONES[ent] to SelectEnter newMAX number