Honeywell Galaxy 8 User Manual

Also see for Galaxy 128: User guide User guide Programming manual

Honeywell Galaxy 8 User Manual Manual pdf 21 page image

Galaxy 8/18/60/128/500/504/512 User Guide15CODES (User Level 6)PURPOSEThe CODES menu option enables the managers, (user level 6), toallocate PINs and related information to users. The codes option isdivided into three sub–menus:1. USER CODESSub divided into nine menus (depending on panel used and whetherthe group and MAX Mode options are enabled) that determine allof the access information for users with Personal IdentificationNumbers (PINs). This menu also assigns MAX details to usernumbers.2. PIN WARNINGAvailable only on the Galaxy 500, 504 and 512. This option0 = OMIT ZONES[ent] to Select88 = CODES[ent] to SelectPIN + ententCODES1 = User Codes>ACODES2 = PIN WarningCODES3 = MAX Users>AMANAGER CODEThe manager code is authorised to:• Program the USER CODES option for each of the user codes.• Allocate other codes to user level 6.• Modify the manager PIN (the manager PIN cannot be deleted)• Assign the MAX features to the code.The manager code defaults to group choice when groups are ena-bled. The manager is able to toggle the group choice option on andoff (using the * key) as required.GALAXY 8 & 18determines the warning period given to users prior to theprogrammed Pin Change date.Note: The valid period for Pin Change codes is programmed bythe installation engineer.3. MAX USERSThis option is only available if the MAX mode is enabled. Theoption is subdivided into two menus that assign the MAX card tousers who do not have a PIN assigned.The manager code defaults to accessing the quick menu.Note: The MAX is the Proximity Access Reader which can beconnected to the Galaxy system. This also refers to theMicroMAX, the enhanced version of the MAX.