Honeywell 5110XM User Manual

Contents

Honeywell 5110XM User Manual Manual pdf 9 page image

– 5 –FIXED-WORD KEYPAD DISPLAYSFIRE – Appears when a fire alarm is detected. Accompaniedby a display of the zone # in alarm.ALARM – Appears when any type of alarm is detected. "FIRE"also appears when a fire alarm is detected. Accompanied by adisplay of the zone # in alarm.SUPV – Appears when a fire sprinkler system supervisorycondition is detected. Accompanied by a display of the zone #having the supervisory condition.ALARMAWAYBYPASSSTAYSUPV NO ACTESTNOT READYCHIME BATFIRE CHECK INSTANTFIXED-WORD DISPLAYCHECK – Appears when a fire zone wiring fault is detected at any time. Also appearswhen certain system problems such as phone line problems are detected. Accompanied by adisplay of the zone # in trouble.AC – Appears when AC power is present.NO AC – Appears when AC power is low, or not present. System is operating from backupbattery power.BAT – Appears when backup battery is low or disconnected.TEST – Appears when the system is operating in one of its test modes (such as the fire drilltest mode).BYPASS – Appears when one or more zones have been bypassed and are no longeroperational.CC – Appears when a site initiated download occurs.FC – Appears when a message (alarm, trouble, etc.) fails to reach the central station.CF – Appears when the system is in the fire walk test mode.dF – Appears when the system is in the fire drill test mode.