Honeywell 5110XM User Manual

Contents

Honeywell 5110XM User Manual Manual pdf 14 page image

– 10 –Silencing and Resetting a Trouble IndicationTo silence the control and keypad buzzers:Press the control's SILENCE/RESET button or enter your User Code, +the OFF key.The keypad's LCD will display the number of the zone in trouble as a Memory indication.To reset the keypad trouble display: First have the cause of the trouble conditioncorrected, and then:Press the SILENCE/RESET button again or re-enter your User Code,followed by the OFF key.ACTIVATING A FIRE DRILL TESTUsing the # + 6 + 9 KeysThis feature can be activated only while no alarm, supervisory, or troublecondition is present and only User Number 2's code can activate this test.This test requires that a keypad and external fire alarm sounder be installed.The test activates the external fire alarm sounders for the purpose of conducting afire alarm drill. Your system will remain operational for fire alarm signaling whilethis test is active (although no message will be sent to the central station unless anactual alarm occurs).To activate the Fire Drill Test enter User Number 2's code, then press the# + 6 + 9 keys.The keypad LCD will display "FIRE DRILL ACTIVE (Alpha) or "TEST dF" (Fixed-Word) and the external fire alarm sounders will produce either a steady or a pulsingsound while this test is active, depending on what your installer selected.ALPHA FIXED-WORDTo terminate the Fire Drill Test enter any User Code, followed by the OFF key.Your system will also automatically terminate this test if an alarm, supervisory ortrouble condition is detected while it is activated.