CLI Command ReferencemessagesMakito X User’s Guide, v2.0, Issue 01 289messagesS YNOPSISmessages add messages getmessages deleteDESCRIPTIONThe messages command is used to manage administrative login messages. This is a logof a limited number of important events recorded such as installation of a software package,failure to establish or maintain connectivity with a remote audit server, Power-On Self Test(POST) errors, and other noteworthy events that require the administrator’s attention.These events will result in a message being sent directly to all logged-in administrators andwill appear on their terminals. The message will also be displayed at the next administrativeWeb interface or CLI login.NOTE The messages command can only be used by an administrator.Messages starting with “POST” are Power-On Self Test events. If you repeatedly getPOST errors, the cryptographic module of the encoder may be compromised, and it isrecommended to re-installed the firmware.A CTIONSRelated Topics• “Managing Messages” on page 212add Adds the message text to the log.This could be used to send messages to other administrators.get Displays messages.delete Deletes the messages.
