Managing the EncoderConfiguring Audio EncodersMakito X User’s Guide, v2.0, Issue 01 1034. To mute the audio (when active), click Mute.NOTE When an audio encoder is muted, it still generates audio data, but the audiocontent is silence. For more information, see Mute on page 104.5. To view statistics for the encoder, click Statistics. For details, see “Audio EncoderStatistics” on page 105.6. To apply your changes, click Apply.The changes will take effect immediately but will not be saved and will be lost after areboot.TIP To save the current configuration, open the ADMINISTRATION > PRESETS page. See“Saving and Loading Presets” on page 174.7. To return to List View, click AUDIO E NCODERS from the sidebar menu.Audio Encoder SettingsThe following table lists the Audio Encoder controls and settings:Audio Setting Default Description/ValuesInputInput Select the Audio Input for the encoder.SDI Analog • Analog• SDI1 (1-2). . (15-16)• SDI2 (1-2). . (15-16)NOTE: The SDI2 audio inputs are onlyavailable on dual-channel systems.TIP: For Analog audio, on dual input SDIencoders, you may need to specify the videoinput from which to derive the audio encoder'sSTC source (either Auto, BNC1, or BNC2).This is done using the CLI. For details, see“stcif” on page 255.DVI Analog • Analog• DVI (1-2)
