HP 98568A Installation Instruction

HP 9121/9122 Flexible Disk DrivesTable 6-22.HP 9121/22 Flexible Disk DriveConnected to Built-in HP-IB Interface (Select Code 7)Device Path File Major Minor InterleaveName Name * Type Number Number ** FactorHP 9121 - Left /dev/dsk/#sO b 2 Ox070nOO 2HP 9121 - Left /dev/rdsk/#sO c 11 Ox070nOO 2HP 9121D - Right /dev/dsk/#sO b 2 Ox070nl0 2HP 9121D - Right /dev/rdsk/#sO c 11 Ox070nl0 2HP 9122 - Left /dev/dsk/#sO b 0 Ox070nOO 2HP 9122 - Left /dev/rdsk/#sO c 4 Ox070nOO 2HP 9122D - Right /dev/dsk/#sO b 0 Ox070nl0 2HP 9122D - Right /dev/rdsk/#sO c 4 Ox070nl0 2* # is a number that identifies the disk drive (e.g., 0 for the root disk, 1 forthe next disk installed, etc.). Replace # with any unique number, and**use the same number in both the /dev/dsk and /dev/rdsk entries (e.g.,/dev/dsk/ls0 and /dev/rdsk/ls0). Record the numbers on the Chapter 6,"Mass Storage" tab.n is a number that identifies the address (set in step 3 of the InstallationProcedure). Replace n with a 0 if the address was set to 0, use 2 if theaddress was set to 2, and so on.Adding Mass Storage Devices 6-69