HP Xw6200 - Workstation - 2 GB RAM Installation Manual

Also see for Xw6600 - Workstation - 2 GB RAM: Installation guidelines Brochure & specs Safety and regulatory information User manual Compatibility chart

Contents

Sliding rack mount kit installationHP xw6x00 Workstation seriesThis document describes how to install the sliding rack mount kit on an HP xw6200, xw6400, and xw6600Workstation. It also describes how to install the workstation into a rack.Kit contentsThis product includes the parts necessary for installing the sliding rack kit in HP round hole and squarehole racks, earlier HP racks, and some third-party racks including some racks with threaded holes. Thefollowing list describes all of the included parts, however not all parts are used with every application.A. Outer slide assembly (2) B. Inner slide assembly (2) C. Flanges (2) D. M4 screws (8)Earlier HP racks and non-HP racksParts for installing the sliding rack mount in HP legacy racks are sold separately in adapter kit partnumber 5064-9677. This adapter kit includes these parts:AA. Front bracket (2) BB. M5x16mm screw (4) CC. M6 flat head screw (2)© 2007 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registeredtrademark of Hewlett-Packard Development Company, L.P. Printed in the U.S.ENWW HP xw6x00 Workstation series 1