HP 98568A Installation Instruction

HP 7911/7912/7914 Disk/Tape DrivesTable 6-9.Separate Tape ControllerConnected to Built-in HP-IB Interface (Select Code 7)Path* File Major Minor ** InterleaveDevice Name Name Type Number Number FactorHP 7911/12/14 - Tape /dev/ct/#sO b 0 Ox070nOO 1HP 7911/12/14 - Tape /dev/rct/#sO c 4 Ox070nOO 1* Replace # with any unique number, and use the same number in both the/dev/dsk and /dev/rdsk entries (e.g., /dev/dsk/1s0 and /dev/rdsk/1s0).Record the numbers on the Chapter 6, "Mass Storage" tab.** n is a number that identifies the address (set in step 4 of the InstallationProcedure). Replace n with a 0 if the address was set to 0, use 2 if the addresswas set to 2, and so on.Table 6-10.Separate Tape ControllerConnected to HP 98624 HP-IB Interface (Select Code 8)File Major Minor * * InterleaveDevice NamePath*Name Type Number Number FactorHP 7911/12/14 - TapeHP 7911/12/14 - Tape/dev/ct/#sO b/dev/rct/#sO co4Ox080nOOOx080nOO11* # is a number that identifies the tape drive. Replace # with any uniquenumber, and use the same number in both the /dev/ct and /dev/rct entries(e.g., /dev/ct/1s0 and /dev/rct/1s0). Record the numbers on the Chapter 6,"Mass Storage" tab.** n is a number that identifies the address (set in step 5 of the InstallationProcedure). Replace n with a 0 if the address was set to 0, use 2 if the addresswas set to 2, and so on.Adding Mass Storage Devices 6-29