H3C SR6608/6604 Routers Installation Manual Chapter 1 Router Overview1-13IV. SlotsFIP-100 provides four MIM slots for some H3C legacy MIMs.The MIM slots on FIP-100 are numbered 1 to 4 from the bottom up and from right to left,as shown in Figure 1-9.(1) Interface module slot 1 (2) Interface module slot 2(3) Interface module slot 3 (4) Interface module slot 4Figure 1-9 Interface module slots on FIP-100Note:The numbers 1 through 4 in Figure 1-9 represent Slot 1 through Slot 4 respectively.Actually, these numbers are not silk-screened on an FIP-100.1.3.3 FIP-200I. IntroductionFlexible interface platform-200 (FIP-200), another type LPU of the device, provides ahigh-speed service processing capability. FIP-200 supports SR66 series HIMs andsome H3C legacy MIMs and provides two Combo interfaces. In consideration of thesmooth upgrade requirements, FIP-200 supports two HIMs or two MIMs, or intermixingof an HIM and an MIM. FIP-200 is hot-swappable.(1) Slot 1(2) Slot 2(3) 10/100/1000 Mbps electrical Ethernet interface 0(4) 1000 Mbps optical Ethernet interface 0(5) 1000 Mbps optical Ethernet interface 1(6) 10/100/1000 Mbps electrical Ethernet interface 1(7) OPEN BOOK signFigure 1-10 Front view of FIP-200
