H3C SR6608 Installation Manual

Also see for SR6604: Installation guide Faq Configuration guide Installation guide Installation guide

Contents

H3C SR6608 Installation Manual Manual pdf 137 page image

H3C SR6608/6604 Routers Installation Manual Chapter 6 Starting and Configuring the Router6-6LED State DescriptionOFF The system works normally without any alarm.ON There is at least one alarm. You need to view thesystem log.ACT (red)Fast flashing(8 Hz)A serious fault has occurred and the needs to betreated immediately.2) The ventilation system works normally. You can hear that the fan is working.3) The configuration terminal displays information normally. You can see the startupwindow on the local configuration terminal. For more information, refer to section6.3 “Startup Process“ on page 6-6.4) After completing the power-on self-test (POST), the system prompts you to pressEnter. When the prompt appears, you can proceed to configure the router.6.3 Startup ProcessAfter power-on, the router initializes its memory, and then runs the extended BootWare.The following information appears on the terminal screen:System start booting...Booting Normal Extend BootWare....The Extend BootWare is self-decompressing...................Done!************************************************************* ** H3C SR6608 BootWare, Version 1.15 ** *************************************************************Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.Compiled Date : Sep 5 2007CPU Type : MPC8548ECPU L1 Cache : 32KBCPU Clock Speed : 1000MHzMemory Type : DDR2 SDRAMMemory Size : 1024MBMemory Speed : 400MHzBootWare Size : 1024KBFlash Size : 4MBcfa0 Size : 495MBNVRAM Size : 128KBBASIC CPLD Version : 134.0EXTEND CPLD Version : 133.0