Garmin cf Que 1620 Application Manual

Also see for cf Que 1620: Quick start guide Declaration of conformity

Garmin cf Que 1620 Application Manual Manual pdf 9 page image

cf Que™ 1620-1-Initializing the GPS ReceiverInitializing the GPS ReceiverThe GPS Receiver (the cf Que device) must be initialized (given an opportu-nity to determine its location) before you can begin using it for navigation. Beforeit can receive signals from GPS satellites overhead, you must turn the receiver onand deploy the antenna on the cf Que™ by positioning it parallel with the horizonfor best satellite reception. In order to receive satellite signals, you must be out-doors and have a clear view of the sky. Satellite signals cannot pass through solidmaterials (except glass) or dense overhead tree cover. When the cf Que initializesfor the first time it may take as long as 15 minutes. This time can be shortenedby using the GPS Info Page to select the general area in which you are currentlylocated (see page 20). Anytime you have traveled more than 600 miles with theGPS receiver turned off, the cf Que must again find its location by re-initializing.If for any reason, you have difficulty initializing your cf Que, refer to theTroubleshooting Guide on page 38, the solution could be a simple as movingslightly to avoid buildings or objects that are blocking or deflecting satellitesignals.Starting Up the cf Que 1620If you followed the Setup instructions provided with the cf Que 1620, then boththe cf Que receiver and Garmin Que application software have been successfullyinstalled in the Pocket PC. To start operation, turn on your device and tap Start todisplay the Start Menu, then tap Programs to display the Programs List with theGarmin Que icon. Tap the Garmin Que icon to display an introduction pageand then the Map Page and you’re on your way to navigating.Helpful Hint: To shorten the process of restoring the Que application to visiblestatus, open Settings and the Menus application on the Personal page. From theMenus page place a check next to Garmin Que to place it on the Start List.It is important to remember that the cf Que GPS receiver will continue to operatewhen the application is not visible. This can contribute to depletion of reserve batterypower. Some Pocket PC devices continue to supply power to the CF slot when thePDA is turned off. To prevent accidental battery drain, it is recommended the youremove the cf Que from the slot when the Garmin Que application is not in use.The methods for closing the Que application are to tap “Exit” from the Map PageMain Menu, or from any application, tap Start, then Settings, and finally Memory andtab to a list of Running Programs. Tap “Garmin Que” and then the Stop button.Viewing the Map PageThe Map Page is the base for accessing all of the Que navigation features. Amessage window at the top of this page keeps you informed of the status of theGPS receiver. When the cf Que GPS receiver is not installed the Map Page willdisplay a “No GPS Connected” message.When the receiver is installed in the CompactFlash slot, the Map Page willthen display a “Waiting for GPS” message until the application connects with thereceiver. Once connected an “Acquiring Satellites” message appears until GPS Loca-tion is achieved.To return to the Map Page from any other Que feature page or option, tap OK.Map PageTap to open the ApplicationGPS ApplicationsStart Up