Garmin cf Que 1620 Application Manual

Also see for cf Que 1620: Quick start guide Declaration of conformity

Garmin cf Que 1620 Application Manual Manual pdf 26 page image

cf Que™ 1620-18-GPS ApplicationsCreating WaypointsCreating a WaypointA waypoint can be created three different ways as explained below. All waypoints areaccessed from the Find Feature Waypoints List. A Waypoint can be renamed, assigneda graphic symbol, a more accurate altitude, moved to a new location, given new lat/loncoordinates, and provided with special comments. When no longer required, it can betransferred to MapSource for storage or deleted from the Waypoints List.To mark your current location as a waypoint:1. From the Map Page, use the stylus to tap the Waypoint icon on thetool bar at the bottom of the page.Be certain the Map Pointer (white arrow) is not displayed, or the loca-tion on the map, marked by the arrow will be saved as a waypoint.2. The “Mark Waypoint Page is displayed with the waypoint automatic-ally named as “Waypoint”. (Each subsequently marked waypoint will benamed “Waypoint 1, 2, 3”, etc.)3. You can change the name to one more descriptive of the location.4. Tap OK to save the new waypoint to the Waypoints list.To mark a point on the map as a waypoint:1. With the Map Page displayed, use the stylus to tap the desired loca-tion on the map which causes the Map Pointer (white arrow) to display.If the point on the map has descriptive information in the map database,it displays for six seconds.2. Once the Map Pointer is at the desired location, tap the Waypoint iconon the tool bar to display the Waypoint Details Page.3. Observe that the waypoint name refl ects the data and that the“Comment” fi eld is blank.4. You may want to rename the waypoint or place a reference inthe “Comment” fi eld.5. Tap OK to save the new waypoint to the Waypoints List.To save a Find Feature item as a waypoint:1. With the item highlighted, hold the stylus in place until the drop downmenu displays. Then tap the “Save As Waypoint” option.To use a waypoint as a Route destination:1. From the Waypoints List, highlight the desired waypoint and hold thestylus in place until the options list appears.2. Then tap “Route To It”.3. From the Map Page with the waypoint displayed on the map. Place theMap Pointer (white arrow) on the waypoint until the description highlights.4. Tap the Route icon to display the Routes Page and then tap the “RouteTo......” dialog.Mark Waypoint PageFind Feature“Save as Waypoint”OptionA Waypoint as aRoute Destination