Garmin cf Que 1620 Application Manual

Also see for cf Que 1620: Quick start guide Declaration of conformity

Garmin cf Que 1620 Application Manual Manual pdf 33 page image

cf Que™ 1620-25-GPS ApplicationsRoutesAvoid Roads and Areas PageRoad Section to Avoid Defi nedRoad and Area AvoidanceYou can select specific sections of roads and define areas to avoid when calculatinga route. This helps you to avoid road construction, heavy traffic areas, etc.To select types of roads to avoid:1. Tap the desired type(s) of roads you wish to avoid when calculating aroute to place a check in the adjacent box. You can choose from Highways, Toll Roads, U-Turns and Unpaved Roads.2. To unselect a road tap the road type to remove the check mark.To select specific sections of roads to avoid:1. Tap the Add Road button to display Avoid Roads Setup Page.2. Select a Start Point by using your current location or tap the “MeasureFrom Pointer” icon to place a start point on a selected road.3. To determine the end point of the section of road to avoided, drag thestylus to the desired location on the map.4. Tap the OK button to display the road section on the map.5. Tap OK to place it on the Avoid Roads list. Tap the box next to any itemon the list to place an “active” check in the box.6. Tap and hold the stylus on a selected Avoid Roads item to View, Edit orDelete.Tap “Measure fromPointer” icon - Tap StartPoint on Map and dragto End PointAvoid Areas Selection PageTap the View/Edit Option to displaythe Selected Area to Avoid PageTo select areas to avoid:1. Tap the Add Area button to display the Avoid Areas Setup Page. Thepage will display a map with your current location centered on the map.2. Use the Drag and Zoom tool zoom in on the area you want to avoid,or use the Pan Map tool to move to the area on the map.3. Use the Draw Box tool from the Tool Bar to defi ne the area you wantto avoid.4. Then tap the OK button and display the Avoid Area Detail Page whereyou can rename it and set an expiration date.5. Tap OK to place it on the Avoid Area list. Tap the box adjacent to anyitem on the list to place an “active” check in the box.6. Tap and hold the stylus on a selected Avoid Areas item to View, Edit orDelete.Area to avoid defi ned by the stylusCenter Current Location on the MapDrag Stylus to Pan the MapDrag to Zoom In on an AreaDrag the Stylus to Defi ne the Area to AvoidView Selected Area to Avoid Page