Garmin cf Que 1620 Application Manual

Also see for cf Que 1620: Quick start guide Declaration of conformity

Garmin cf Que 1620 Application Manual Manual pdf 38 page image

cf Que™ 1620-30-GPS ApplicationsMeasure DistanceUsing the Measure Distance UtilityMeasure Distance is a feature that allows you to determine the distance betweentwo items on the map.To access Measure Distance:1. From the Map Page, open the Main Menu and then tap Utilities todisplay the Utilities List.2. Tap Measure Distance to display the Measure Distance Page.To Measure Distance from your current location:1. Adjust the map scale to include your current location and the point youwant to measure to. Tap the map scale in the lower left corner of themap to display the map scale control panel. Select the desired scale.Or... use the “Zoom Out” tool from the Tool Bar to defi ne an area onthe map and enlarge it.2. Tap an item on the map and observe the direction and distance in thefi eld above the Tool Bar.To Measure Distance between two points on the map:1. Adjust the map scale to include the points you want to measurebetween. See Step 1 above.2. Tap the fi rst item on the map and observe the measurement line con-necting your current location to the item. Note the Map Pin icon locatedbehind the Current Position Icon.3. Tap the Map Pin icon on the Toolbar to move it to the fi rst map item.Then tap the second map item to measure the distance between thetwo. The distance displays in the fi eld above the Tool Bar.If you don’t want to lose map detail by zooming out in order view both pointson the map, you can tap the Pan Map icon and use the stylus to pan the map tothe second point on the map.Measure Distance PageMap Scale ControlPanelZoomInMeasure Between Two PointsCenterLocationMap ScaleTap to displayControl PanelTool Bar IconsMapPinPanMap