Garmin aera 795/796 Pilot’s Guide190-01194-00 Rev. A 77Flight Planning Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices Indexa) From the Main Menu, touch FPL List.b) Touch the Saved Flight Plan with an approach loaded. An option menuappears.c) Touch the 'Review Flight Plan' menu option.2) Press the Menu Icon.3) Touch the 'Remove Approach' menu option (only available if anapproach is loaded).ACTIVATING VECTORS-TO-FINALAfter an approach has been activated, the 'Activate Vectors-to-Final' menuoption is used when being vectored to the final approach course by Air Traffic Control(ATC).When Vectors-to-Final are activated, the aera 795/796 creates an extension of thefinal course, beyond the final approach waypoint in the database (final approach fix[FAF]). A Vector to Final symbol appears beside the first approach waypoint in theActive Flight Plan.Activating/Cancelling Vectors-to-Final:1) From the Main Menu, touch the Active FPL Icon.2) While navigating an Active Flight Plan (with an approach activated), touchthe Menu Icon.3) Touch the 'Activate Vectors-to-Final' or 'Cancel Vectors-to-Final'menu option.The aera 795/796 provides no guidance to the inbound course. The course deviationneedle on the graphic HSI remains off-center until established on the final approachcourse. The map shows an extension of the final approach course using a boldmagenta line.If Vectors-to-Final are not activated, the aera 795/796 creates a straight-line coursedirectly to the first waypoint in the approach.Loading the approach cancels the Direct-to and initiates a route to the FAF.
