Garmin aera 795/796 Pilot’s Guide 190-01194-00 Rev. A112Additional FeaturesOverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex1) From the map, highlight an airport using the Map Pointer.2) Touch the Map Feature Button.3) Touch the TERPs Tab (if necessary).4) Touch the buttons to cycle through the available Charts or touch theChart Field and touch the desired Chart from the vertical list.Displaying ChartView in Full Screen Mode:1) From the Main Menu, touch WPT Info > TERPs (if necessary).2) With the desired chart displayed touch TERPs again.3) Touch the icon to exit Full Screen Mode.When a terminal procedure chart is not available for the requested airport or thereis an error rendering the data, the banner "CHART NOT AVAILABLE” appears onthe screen. The "CHART NOT AVAILABLE” banner does not refer to the ChartViewsubscription, but rather the availability of a particular airport chart selection orprocedure for a selected airport.Chart Not Available BannerAIRCRAFT SYMBOLThe aircraft symbol is shown in magenta on the chart only if the chart is to scaleand the aircraft position is within the boundaries of the chart. The aircraft symbol isnot displayed when the Aircraft Symbol Not Shown Icon (X over the aircraft symbol)appears in the lower right corner. The Aircraft Symbol Not Shown Icon may appear atcertain times (e.g., a loss of GPS), even if the chart is displayed to scale.Aircraft Symbol Displayed on Chart (Waypoint Page)Single DisplayAircraftPosition onChart
