Garmin aera 795/796 Pilot’s Guide190-01194-00 Rev. A 29Overview Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices IndexChanging the Nearest Type:1) From the Main Menu, touch Tools > Position > Menu > ChangeNearest Type.2) Touch the desired nearest type ('Automatic', 'Airport', 'VOR', 'NDB','Intersection', 'City', or 'Waypoint').Viewing the present position:From the Main Menu, touch Tools > Position.NEW LOCATIONThe ‘New Location’ menu option is used when the GPS Receiver is having troublefinding the satellites it expects to be there. If 'Automatic' is selected, the GPS willattemp to figure out the new location.Changing the New Location setting to automatic:1) From the Main Menu, touch Tools > Position > Menu > NewLocation.2) Touch 'Automatic'. The GPS will attempt to figure out the new location.Entering a new location:1) From the Main Menu, touch Tools > Position > Menu > NewLocation.2) Touch 'Use Map' or 'Use Identifier'.3) After selecting your approximate position using the map pointer or enteringan identifier, touch OK.4) The GPS Receiver will begin a new search based on the location entered.SIMULATOR MODESimulator Mode is helpful for practicing with the unit indoors or when satellite orXM signals are unavailable. All waypoints and routes created in Simulator Mode areretained in memory for future use.NOTE: Do not attempt to navigate using Simulator Mode. When the unit isset to Simulator Mode, the GPS receiver is turned off. Any Satellite SignalStrength Bars shown are only simulations and do not represent the strengthof actual satellite signals.
