Garmin aera 795/796 Pilot’s Guide190-01194-00 Rev. AAppendix D145Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices IndexConnection Wire ColorPower RedPower Ground/Data Ground BlackTX1 (Data Out) BlueRX1 (Data In) YellowTX2 (Data Out) OrangeRX2 (Data In) PurpleAudio Right WhiteAudio Common GreenAudio Left Brownaera 795/796 Aviation Bare Wire Connections2) From the Main Menu, touch Tools > Setup > Interface.3) Touch the 'Serial Data Format' datafield button. A vertical list is displayed.4) Touch ' Aviation In/NMEA & VHF Out' or ' TIS In/NMEA & VHF Out'from the list. These comm modes send both NMEA data and VHF frequencyinformation.The following features are now available on the radio:• Remote frequency lists for departure, enroute, and arrival airports.• Nearest VOR frequencies (SL30 only).The aera 795/796 can also directly tune a standby frequency.Selecting a standby comm frequency:1) From the Main Menu, touch WPT Info > Freq Tab2) Touch the desired frequency from the list. The frequency is now tuned instandby.Or:a) If the frequency has additional information (denoted with an *). Touchthe desired frequency from the list.b) Touch the 'Tune' Button.
