Garmin aera 795/796 Pilot’s Guide 190-01194-00 Rev. AAppendix D142OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndexConnecting the cable:Make all applicable cable connections per the following figure.Attaching the aera (portrait orientation) to the yoke mount:1) Fit the left side of the aera into the cradle.2) Press the right side of the aera into the cradle until it snaps into place.Attaching the aera (landscape orientation) to the yoke mount:1) Fit the bottom of the aera into the cradle.2) Tilt the aera back until it snaps into place.Removing the aera from the yoke mount:1) Press the Release Button on the side of the cradle to release the aera.2) Remove the aera from the cradle.Removing the yoke mount from the yoke shaft (or control arm):1) Disconnect the power plug, audio jack, and mini-USB connector (ifapplicable).2) Loosen the clamp by turning the Clamp Adjustment Knob until the yokemount assembly can be easily removed from the yoke shaft or control arm.
