GPSMAP 60CSx Owner’s Manual 31BASIC OPERATION >Navigating a Saved TrackYou can save your track log to use later as aTracBack. When initiated, a TracBack route takes youback to the oldest stored track log point.To use the TracBack feature:1. With the Saved Tracks Page for the track orthe Track Log open, highlight the TracBackbutton, and press ENTER to open theTracBack Page. A map showing the entiretrack appears and you are prompted to selectthe point you want to TracBack to.2. Use the ROCKER to move the pointer to thepoint on the map, and press ENTER to startnavigating the TracBack.3. Select either Follow Road to route back tothe selected point using available roadways,or select Follow Track to retrace your originalpath of travel. Highlight the Don’t Ask Againoption, and press ENTER if you want to usethe same option each time you use TracBack.The Map Page opens with directions to thefirst turn on the track at the top of the page.4. Move in the directionof the first turn. Whenyou reach the first turn,directions to the nextturn are shown, and soon, until you reach yourdestination.5. To exit, press MENU, andselect Stop Navigation.To create a user waypointon a saved track:1. With a saved track shown on the map, use theROCKER to move the pointer to the place on thetrack that you want to mark as a user waypoint.2. Press and hold the ENTER key to open theMark Waypoint Page.3. Customize the user waypoint, highlight OK,and press ENTER to save it.4. To delete these track logs, highlight individuallogs, and then press ENTER. Use the DeleteAll button to clear the entire list.
