Page 5-10 400W Series Installation ManualRev. G 190-00356-025.3.4 MAIN INPUTS 1 PageSelect the MAIN INPUTS 1 Page (see Figure 5-6). This page(along with the MAIN INPUTS 2 Page) allows you to monitorthe data on ARINC 429, RS-232 and other electrical inputs.This is used for verifying electrical interfaces duringinstallation and troubleshooting. Information that is not beingreceived by the 400W Series unit is dashed out.Field DescriptionOAT Outside Air TemperatureSAT Static Air TemperatureTAT Total Air TemperatureIAS Indicated AirspeedTAS True AirspeedWSPD Wind SpeedHDG Heading (True or Magnetic)WDIR Wind DirectionB ALT Barometric-corrected AltitudeD ALT Density AltitudeP ALT Pressure Altitude5.3.5 MAIN INPUTS 2 PageSelect the MAIN INPUTS 2 Page (Figure 5-7). This page isalso used for verifying electrical interfaces during installationand troubleshooting. Information that is not being received bythe 400W Series unit is dashed out.Field DescriptionL FF Left Engine Fuel FlowR FF Right Engine Fuel FlowT FF Total Fuel FlowT FOB Total Fuel on BoardGPS SC GPS Selected CourseVLC SC VOR/LOC Selected Course (GNS 430W Only)JOYSTICK WPT Latitude and longitude of a joystick waypoint sent by an EFIS or RADARindicator.CDI Status of the CDI key (GNS 430W Only)Figure 5-6. MAIN INPUTS 1 PageFigure 5-7. MAIN INPUTS 2 Page
