Garmin GNS 430 Pilot's Manual & Reference

Also see for GNS 430: Specification Pilot's manual Instructions Pilot's guide addendum Pilot's guide addendum

Contents

Garmin GNS 430 Pilot's Manual & Reference Manual pdf 68 page image

60To change a data field on the active flight plan page:1. With the active flight plan page displayed, press m to display the active flight plan pageoptions window.2a. Rotate the large right knob (d) to highlight “Change Fields?” and press E.3. Rotate the large right knob (d) to highlight the field you wish to change.4. Rotate the small right knob (a) to select the desired data item and press E.5. Press the small right knob (r) to remove the cursor.To restore factory default settings for data fields on the active flight plan page:1. With the active flight plan page displayed, press m to display the active flight plan pageoptions window.2b. Rotate the large right knob (d) to highlight “Restore Defaults?” and press E.Active Flight Plan OptionsThe following options (some covered on the preceding pages) are available for thefl ight plan catalog:Activate Leg? activates/reactivates the flight plan and selects the highlighted leg asthe “active leg” (the leg which will currently be used for navigation guidance).To activate a flight plan along a specific leg:1. Press the small right knob (r) to activate the cursor and rotate the large right knob (d) tohighlight the desired destination waypoint.2c. Select the “Activate Leg?” option from the active flight plan page options and press E.3. A confirmation window will appear. With “Activate?” highlighted, press E.Crossfill? allows you to transfer the active flight plan between two 400- or 500-seriesGarmin units in a dual unit installation. See pages 58 and 142 foradditional information on this feature.FLIGHT PLANSActive FlightPlan Options4ocqoa