Garmin GNS 430 Pilot's Manual & Reference

Also see for GNS 430: Specification Pilot's manual Instructions Pilot's guide addendum Pilot's guide addendum

Contents

Garmin GNS 430 Pilot's Manual & Reference Manual pdf 33 page image

25COMAuto-Tuning fromFlight Plan/Database 1To select a COM frequency for any airport in your flight plan:1. Select the NAVCOM page from the NAV page group. (See page 27, or press and hold c,then rotate the small right knob, a, until the NAVCOM page appears.)2. Press the small right knob (r) to place the cursor on the airport identifier field. To the left ofthis field appears Departure, Enroute or Arrival — depending on the placement of the displayedairport within your flight plan.3. Rotate the small right knob (a) to display a window listing the airports in your flight plan.Continue rotating the small right knob (a) to select the desired airport.4. Press E to return to the NAVCOM page with the frequencies for the selected airport.5. Rotate the large right knob (h) to highlight the desired frequency.6. Press E to place the highlighted frequency in the standby COM window field.To select a COM frequency for any airport in the database:1. Select the airport frequencies page from the WPT page group. (See page 94, or rotate thelarge right knob, d, to select the WPT page group. Then rotate the small right knob, a,until the airport frequencies page appears.)2. Press the small right knob (r) to place the cursor on the airport identifier field.3. Use the small (a) and large (d) right knobs to enter the identifier of the desired airport.Press E when finished.4. Rotate the large right knob (h) to highlight the desired frequency.5. Press E to place the highlighted frequency in the standby COM window field.The NAVCOM page provides a frequency listfor all the airports (departure, en route andarrival) along your active flight plan.Use the airport frequencies page to retrieve afrequency list for ANY airport in the JeppesenNavData database.