GE ZVC36LSS Installation Instructions Manual

Also see for 36" CUSTOM HOOD INSERT ZVC36LSS: Dimensions and installation information Owner's manual Installation instructions Installation instructions

Contents

GE ZVC36LSS Installation Instructions Manual Manual pdf 10 page image

Installation PreparationTOOLS AND MATERIALS REQUIRED(NOT SUPPLIED)Aluminizedduct tape SiliconePencil and tape measure S _ Safety glasses"_ _ _;:_ _ GlovesKnife L J 1Step ladderPlumb line Flashlight_ 1/4" pivotingsoo etNeedle-nose pliers __1" conduit (for remotemounting only)3/8" socket/nut driverElectric drill andappropriate bitsWire nuts 8" ducting andcaps as neededPhillips and flat blade Wire cutter/stripper Strain reliefscrewdriversREMOVE THE PACKAGINGCAUTION: Wear gloves to protectagainst sharp edges.ATTENTION : Portez des gants pour_viter les blessures caus_es par les tranchants.CAUTION: LIFTTHE INSERT SLEEVEOUT OF THE BOX BY GRASPING THE SIDES.ATTENTION : SOULEVEZLEHANCHON INTERIEUR DE LA BOITE EN SAISISSANTSES COTES.1. Open hood carton.2. Remove the liner, foam and cardboard.3. Remove the tape securing the filters to the insertsleeve, lift the tabs and remove the filters.J4. Unscrew the S nuts securing the damper ventplate assemblg, and remove it from the insertsleeve. Set the S nuts and the damper vent plateassemblg aside, as SOUwill be re-installing it laterin the installation process.5. Remove the screws attaching the insert sleeve tothe mounting board. Discard the screws.6. Grasp the insert sleeve bg the outside edges, andlift straight up and out of the carton.NOTE: Do not lift the insert sleeve bg the blowermotor,7, Remove and properlg discard the plastic wrapping,8, Remove the parts box and other packaging,10