GFK-2737F December 2016 35Chapter 4 ConfigurationThis chapter explains how to configure a PROFINET IO-Device consisting of an RX3i PROFINET Scannerand the I/O modules located in its rack into a PACSystems RX3i system controlled by an RX3i CPU.Additional information about RX3i configuration is available in other PACSystems documentation (refer toSection 1.9, PACSystems Manuals) and in the Logic Developer online help.This chapter discusses the following topics: Configuration Overviewo Basic Configuration Stepso Configuration Tools Adding an RX3i PROFINET Scanner to a LAN- Configuring RX3i PROFINET Scanner- Adding RX3i Modules to a Remote Nodeo Adding a Power Supplyo Adding and Configuring an Ethernet Porto Configuring Module Parameterso Configuring Analog Modules that have DIP Switcheso Configuring Analog Modules that have Jumpers • Assigning Device Names- Transferring the IO-Device Name with an SD Card After the Configuration is Stored to the PROFINET Controller
