GE RX3i PROFINET User Manual

Also see for RX3i PROFINET: User manual Quick start guide

Contents

GE RX3i PROFINET User Manual Manual pdf 11 page image

Chapter 1. Introduction4 PACSystems* RX3i PROFINET IO-Scanner User Manual GFK-2737F1.2 RX3i PROFINET Scanner SpecificationsPROFINET Support PROFINET Version 2.3 Class A IO-DeviceRedundantly controlled operation conforms to PROFINET V2.3 Type S-2 SystemRedundancy.Controller CPU VersionRequiredRX3i CPU315/CPU320 with firmware version 7.10 or later RX3i CPE305/CPE310 withfirmware version 7.10 or later RXi Controller with firmware version 7.80 or laterProficy Machine EditionVersion RequiredVersion 8.0 or laterPower Requirements 3.3 Vdc: 1.2 A with no SFP devices installed1.9 A maximum (two SFP devices installed, 0.35 A per SFP)5 Vdc: 1.1 A maximumOperating TemperatureRange0 to 60°C De-rated to 57°C:• If 100 Mbps Fiber SFPs installed, or• If Copper SFPs operating at 1 GbpsNumber of PortConnectorsTwo RJ45 and Two SFP Cages(SFP devices not included, available separately.)USB Connector (forfirmware upgrades)One Micro-B connector. USB 2.0 compliant running at Full-speed(12 MHz)SD Card Supports SD and SDHC cards.PNS Status andControl Bits32 input status bits and 32 output control bitsPROFINET I/Oproduction rate (ms)(I/O Update Rate)Configurable selections: 1, 2, 4, 8, 16, 32, 64, 128, 256 or 512 msNumber of IP Addresses Five. One per external port and one internal.I/O Station MaximumLimitsNumber ofI/O Modulesper stationNumber of backplane slots in the host RX3i rackless one for PNS001 module itselfless the number of slots occupied by the RX3i power supplyI/O dataper station2880 bytes total1440 bytes of input data1440 bytes of output dataConfiguration V2.3 GSDML file.The file is included with Proficy Machine Edition; available for import into 3rd-Party tools.Note: Configuration software that supports GSDML V2.3 MenuList elements (such asProficy Machine Edition 8.0 or later) is required to display the configurationparameters of most IC695xxx I/O modules.For product standards, general operating specifications, and installation requirements, refer to thePACSystems RX3i System Manual, GFK-2314