GE JGBS80 Owner's Manual & Installation Instructions

Also see for JGBS09: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions

GE JGBS80 Owner's Manual & Installation Instructions Manual pdf 35 page image

ASSEMBLE SURFACE BURNERSCAUTION: Do not operate the burnerwithout all burner parts in place.Assemble the side burners as shown.A5ASSEMBLE SURFACE BURNERS (CONT.)Assemble the center burner. Make sure that thelocking feet on the center grate hook over theside grates.Replace the burner heads and caps. Makesure that the heads and caps are replaced in thecorrect location. There is one oval (center) headand cap assembly and four side heads and caps.For model JGBS80:For model JGBS09:Make sure the slot in the burner head ispositioned over the electrode.Make sure that the heads and caps are replacedin the correct locations.CB5Installation InstructionsELECTRICAL CONNECTIONS (CONT.)Usage Situations where Appliance Power Cordwill be Disconnected Frequently.Do not use an adapter plug in these situationsbecause disconnecting of the power cord placesundue strain on the adapter and leads to eventualfailure of the adapter ground terminal. The customershould have the 2-prong wall receptacle replacedwith a three-prong (grounding) receptacle by aqualified electrician before using the appliance.The installation of appliances designed formobile home installation must conform with theManufactured Home Construction and SafetyStandard, Title 24 CFR, Part 3280 (formerly theFederal Standard for Mobile Home Constructionand Safety, Title 24, HUD, Part 280) or, when suchstandard is not applicable, the Standard forManufactured Home Installations, latest edition(Manufactured Home Sites, Communities andSet-Ups), ANSI A225.1, latest edition, or withlocal codes.Electric Disconnect• Locate disconnect plug on the range back.• Pinch sides of connector and pull out of range back.B3SEAL THE OPENINGSSeal any openings in the wall behind the rangeand in the floor under the range when hookups arecompleted.4Burner capBurner headSideGrateElectrodeBurner headand capassemblyCenter GrateElectrodeLockingFootLockingFootMedium burnerhead and capFront of rangeLarge burnerhead and capSmall burnerhead and capExtra largeburner headand capOval head and capassemblySlotElectrode SlotMedium burnerhead and capFront of rangeMedium burnerhead and capMedium burnerhead and capMedium burnerhead and capOval head and capassembly35