XG Series User's Guide Chapter 5 Command ReferencePort Information Settings905.1.1 Ethernet Common InformationThis section explains about the commands related to ethernet common information.5.1.1.1 forwardingmodeFunction forwardingmode Available Model XG2600Syntax forwardingmode Options• store-and-forwardstore and forward mode is used• cut-throughcut through mode (default) is usedUse Mode Configuration mode (admin class)Explanation Set the switching mode of 10GbE ports.Caution• In cut-through mode, 65 byte and over error frames and 16129 byte and over framesare forwarded. 64 byte and below frames are not forwarded.It is forwarded as FCS error frame at the frame relay of 16129 or more.• In store and forward mode, Error frames and 16129 byte and over frames are notforwarded.• Statistics for 10GbE ports is cleared when you change the switching mode.Default It is assumed that cut through mode is used.forwardingmode cut-through
