XG Series User's Guide Chapter 6 Managing the DeviceVerifying the Device Operations5756.1.2 Verifying System StatusVerify the system status by entering the "show system information" command in the operation mode (admin class) or theconfiguration mode (admin class).The following example shows the information that is displayed when the "show system information" command is entered.Execution Example1) Current timeDisplays the current date and time.2) Startup timeDisplays the date and time when the device started up.3) SystemDisplays the device name.4) Serial No.Displays the device serial number.5) ROM Ver.Displays the ROM version number in the xx.yy format. xx.yy is indicated by adecimal value.6) ASIC Firm Ver. (XG2600 Only)Displays the ASIC firmware version number in the yymmddPLn format.yymmdd is indicated by date (year-month-day). PLn shows patch level and n isindicated by digit decimal value.7) Firm Ver.Displays the firmware version number in the Vxx.yy format."xx.yy is indicated by a two-digit decimal value.8) Startup-configDisplays the date and time when you have saved the configuration to be readduring device startup, as well as the file name.9) Running-configDisplays the date and time, when you applied the configuration that is currentlyactive.10) MACDisplays the MAC address with a 12-digit hexadecimal value.11) MemoryDisplays the memory size installed in the device.# show system informationCurrent time : Fri Jan 14 14:00:45 2011 ---(1)Startup time : Fri Jan 14 08:40:05 2011 ---(2)System : XG2600 ---(3)Serial No. : 00000123 ---(4)ROM Ver. : 1.3 ---(5)ASIC Firm Ver. : 090203PL1 ---(6)Firm Ver. : V01.00 NY0001 Tue Nov 14 17:52:15 JST 2006 ---(7)Startup-config : Sat Jan 01 13:08:04 2011 config1 ---(8)Running-config : Sat Jan 01 13:08:04 2011 ---(9)MAC : 000b5d89011 ---(10)Memory : 256MB ---(11)
