Fujitsu XG0224 User Manual

Also see for XG0224: Hardware guide User guide Safety and installation guide

Contents

XG Series User's Guide Chapter 5 Command ReferenceBridge Counter, Log, Statistics, and Status Display and Clear OperationCommands4695.28.2 Bridge Counter, Log, Statistics, and Status ClearCommandsThis section explains the commands related to bridge counter, log, statistics,and status clearing.5.28.2.1 clear bridgeFunction Initialize the dynamically learned MAC address from the learning table.Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600Syntax clear bridgeclear bridge port clear bridge mac OptionsN/ADelete all dynamically learned MAC addresses from the learning table.• portSpecify to delete port by port.• macSpecify to delete MAC address by MAC address.• port listSpecify a list of physical port numbers to initialize learning table.When specifying multiple port numbers, separate them with commas (,).When setting sequential numbers, separate them with hyphens (-). (Example: "1-8").• MAC addressSpecify the MAC address to be deleted from the learning table.(It must be in the xx:xx:xx:xx:xx:xx format, where "xx" is a 2-digit hexadecimal value.)• VLAN IDSpecify a decimal VLAN ID from 1 to 4094.Use Mode Operation mode (admin class)Configuration mode (admin class)Explanation Delete dynamically learned MAC address from the learning table.Caution• The address statically learned by the "vlan forward" command definition is notinitialized.• If a member port of link aggregation is specified, all learning addresses of the linkaggregation are deleted.Execution Example# clear bridge#