Menu
Dahua Modular VTO User Manual
Also see for VTO2000A-B: Quick install guide
                                                                                                        | |
Contents
| 
28Figure 5-16Add VTO or fence station.Step 4 Add main VTO.In Figure 5-16, enter main VTO name, IP address, “User Name” and “Password”.1.Switch “Enable Status” to .2. “User Name” and “Password” shall be consistent with WEB login user nameand password of VTO. Otherwise, it will fail to connect. “Enable Status” of main VTO is “ON” by default. After setting VTO info, pleaseturn it off and then reboot, in order to put it into effect. Add fence station.Press to switch to sub VTO setting interface.1.Select device type to be “fence station”; enter sub VTO name (fence station name),2.VTO middle no. (fence station middle no.), “User Name” and “Password”.Switch “Enable Status” to .3.Click [OK] to save the settings.Step 55.1.3 VTH Settings (Version 4.0)5.1.3.1 InitializationSet the password and bind your Email. Password: it is used to enter project setting interface. Email: it is used to retrieve your password when you forget it. |
Related manuals for Dahua VTO2000A-B
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved