185 Device Debugging5.1 Debugging Settings5.1.1 VTO Settings5.1.1.1 InitializationFor the first time, please initialize login password.Please ensure that default IP addresses of PC and VTO are in the same network segment.Default IP address of VTO is 192.168.1.110.Connect power supply of VTO, and power on.Step 1Enter default IP address of VTO at the address bar of PC browser.Step 2The system displays “Setting” interface, as shown in Figure 5-1.Figure 5-1Enter “New Password” and “Confirm”, and click “Next”.Step 3The system displays “Protect” interface, as shown in Figure 5-2.This password is used to login WEB interface. It shall be at least 8 characters, and shallinclude at least two types of number, letter and symbol.
