Menu
Dahua Modular VTO User Manual
Also see for VTO2000A-B: Quick install guide
                                                                                                        | |
Contents
| 
56Figure 7-14Enter the planned “IP Address”, “Subnet Mask” and “Default Gateway”.Step 2Turn on SSH according to needs.Step 3After SSH is on, Telnet and other debugging terminals can connect VTO, operate anddebug it.Click “OK” to save the settings.Step 47.5.2 FTP ServerSet FTP server, so recordings and snapshots will be saved in FTP server.Select “System Config > Network Config > FTP”.Step 1The system displays ““FTP” interface, as shown in Figure 7-15.Figure 7-15Set the parameters and refer to 错误!未找到引用源。 for details.Step 2Parameter DescriptionIP Address IP address of the host to install FTP server.Port No. It is 21 by default.Username Username and password to visit FTP server.PasswordTable 7-1Click “OK” to save the settings.Step 37.5.3 PortSet the port to visit WEB interface of VTO.Select “System Config > Network Config > Port”.Step 1The system displays “Port” interface, as shown in Figure 7-16. |
Related manuals for Dahua VTO2000A-B
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved