Cisco DX80 Quick Reference Manual

Also see for TelePresence DX80: Manual User guide User guide User guide User guide

Quick Reference GuideDX80 TouchscreenService Desk 204-940-8500 Option 4, Option 1or toll-free 1-866-999-9698 Option 4, Option 1rev 04Apr2019Page 1 of 2www.mbtelehealth.ca1. Tap Call.2. Tap in the search/dial field and enter the .phone number using the keypad.3. Tap Call to connect.Camera with privacy shutter,turn counter-clockwise toshut and clockwise to open.Power On/OffMicrophonein each legLoudspeakerMicrophone mute button,loudspeaker volume controlsand USB socket are on theside of the unit.Make a CallThe Home screen should always bedisplayed prior to connecting to a site;if not, this may mean that a previouscall was not disconnected. If you donot see the Home screen, press End todisconnect prior to connecting your call.Switch between computer monitor andvideo screen by tapping the screen.(When using as a desktop unit: if youdo not see the menu items along thebottom of the screen, this may indicatethat the monitor is in sleep mode.Move the mouse or press a key on thekeyboard to wake it up.)Site to Site CallFar End Control Site to Site/Layout multi-siteMulti-siteThe default layout is shown on the right. Other layout optionsmay be selected by the host/presenter when booking an event.Selfview options1. Tap Call.2. Tap in the search/dial field and enter the 5 digit number using the keypad.3. Tap either of the green Call buttons to connect.1. Tap Selfview to turn it on andoff. Ensure you are visible so the othersite can see you.2. Tap and hold the selfview image to seeavailable positions on the screen.3. Drag to the desired location andrelease.Multi-Site CallYou will be automatically connected (seenote on back)Press End to disconnect at the end ofevery call (Site to Site and Multi-site).Out of Province Call12 3Fig 2Fig 1Touchscreen-this unit doesnot require aremote control.12This unit is available as a desktop, mobile cart or fixed unit.Note: When using a mobile cart you will need to plug it in and turn on the power.Site to Site• Tap Participants , tap the participant, then tap Camera. (Fig 1)• Adjust the other site’s camera using the pan/tilt arrows and zoom +/-. Tap . . . .outside the controls to return to near end (Fig 2).(Note: This only applies if the other site has a remotely controllable camera - theDX80 has a fixed camera along with some other types of equipment.)

/ 2

Related manuals for Cisco TelePresence DX80