Cisco DX70 Quick Reference Manual

Also see for TelePresence DX70: Manual Installation guide User guide User guide User guide

Contents

Front View and Home ScreenRear ViewCisco DX70 Quick Reference GuideD1512802 Quick Reference Guide Cisco DX70English Produced August 20141. USB ports2. HDMI sockets3. LAN connection. Connect your PC LANhere to let your DX70 and PC share acommon LAN connection4. LAN connection5. Power supply socket.Show Self ViewTap the Call icon, if needed, then tap the More icon (...) inthe upper right corner and select Self-view from the menu.Forward All Calls1. Tap the Call icon, if needed, then tap the More icon (...)in the upper right corner and select Forward all calls.2. You will be prompted to specify a target phone number.3. To cancel Forward all calls, repeat the process.Turn On Do Not DisturbTap the Call icon, if needed, then tap the More icon (...) inthe upper right corner and select Do not disturb. Available(and visible) only when feature has been activated by yourAdministrator.Mute a CallPress the Microphone mute button on the right side of thesystem. To unmute a call, press again.Stop Your Video TransmissionTurn the camera shutter counter-clockwise. To resumevideo transmission, turn shutter clockwise.VoicemailThe Message Waiting Icon (MWI) light indicates that youhave a new voice message.To view your voice messages:1. Tap Recents.2. Tap Call voicemail.Play voice message:Tap Play. Camera with privacy shutter, turn counter-clockwise toshut and clockwise to open Microphone mute button and loudspeaker volumecontrols Loudspeaker SD card slot and connectors for headset and USB.This USB socket is of the high-current (2 A) typeallowing it to serve as charging port for suitabledevices. Power On/Off MicrophoneYour DX70 may operate in one of three modes: PublicMode, Simple Mode or Enhanced Mode. Public Mode issimilar to a kiosk mode. Public Mode is not covered bythis guide.In Enhanced Mode the DX70 acts as an Android tablet,the phone part of the unit is then an app referred toas the Call app. Operating modes are set up by yourAdministrator.Simple Mode: Provides access to the following functions:Place callsAccess your list of ContactsDisplay the list of Recent callsDisplay any Voice Mail (Messages)View PC (if applicable)Display the Settings menuEnhanced Mode: Requires that you start the Call Appbefore you can use the system as a phone.To start the Call App tap Phone ( ) in the left corner of theblack bottom bar. The Phone icon is shown in EnhancedMode only.The usual Android navigation buttons (Back, Home andRecently Used Apps) are shown when the Call App isrunning.Note The descriptions provided in this document assumethat the system either is in Simple Mode or that the CallApp is running.

/ 2

Related manuals for Cisco TelePresence DX70