Cisco DX80 Quick Reference Manual

Also see for TelePresence DX80: Manual User guide User guide User guide User guide

May 2019DX80QuickReferenceGuideThe Telehealth device is in standby if power button is flashing.Touch anywhere on the screen to wake system from standby.If the system is in standby, an incoming call will wake it automatically.If power button light is off, press Power Button to turn on system.Turning On/Waking up the SystemTap the screen anywhere to get the call option to appear.Tap the 'Call' button.Making a Call1. Searching the DirectoryTap the 'Directory.'Subfolders of all RHAs and NLCHI will appear.The first two letters of the system name denotes region.(e.g., LG.LC.4 is in Labrador-Grenfell Health.)Tap the subfolder of the desired system.Scroll through the listed systems and tap the desired system.Or type the system or contact name in the 'Search' or 'Dial' field.Tap the name of desired system.Ensure the selected system is correct and tap the green 'Call' button.2. Searching RecentsTap 'Recents' on the call screen.Scroll through the listed systems and tap the desired system.Ensure the selected system is correct and tap the green 'Call' button.3. Searching FavouritesTap 'Favourites' on the call screen.Scroll through the listed systems and tap the desired system.Ensure the selected system is correct and tap the green 'Call' button.4. Dialing Directly Using Search or DialTap the 'Search' or 'Dial' field.Type a dialstring using the touchscreen keyboard.Once the address is entered tap the 'Call' button. Ensure youhave entered the dialstring correctly before calling.Four Ways to Place a Call

/ 3

Related manuals for Cisco TelePresence DX80