Cisco 7841 Quick Reference GuideMake Calls Obtain Dial Tone: Choose one of the following and enter the desired phone number• Lift the handset• Press an unlit Line Button (activates speaker phone)• Press the soft key (activates speaker phone)• Press the (unlit) Headset Button (activates headset)• Press the Speakerphone Button (activates speakerphone)TodialINTERNATIONALCALLS:9-011-xxx-xxx-xxxxDial from the Call H istor yAs you dial a phone number, phone numbers display from your call history.Scroll to the desired number and choose one of the following:• Press the Select Button (middle silver button) in the Navigation pad .• Press the Call soft key.• Pick up the handset.Redial Nu mb ers• Press the soft key. Your phone calls the last number you dialed.End CallsNote: You must resumea held call in order toend the call.Choose one of the below based on current use of handset, speaker phone or headset• Hang up the receiver• Press the Speakerphone Button• Press the Headset Button• Press the active Line ButtonAnswer CallsThere are severaldifferent ways ofanswering calls on yourphone.Note: To silence aringing call, press theVolume Button downonce.To answer a ringing call , choose one of the following:• Lift handset• Press the Answer soft key (activates speaker phone)• Press the Speakerphone Button (activates speaker phone)• Press the Headset Button (activates headset)• Press the flashing amber Line Button (activates speaker phone)Call Waiting (double beep)• To answer second call press, the flashing line button.• Active call is placed on hold and ringing (or held) call is connected.Note: You may also flip flop between two held calls by pressing flashing line button.Pickup • Lift handset• Press Pickup soft key• Press Answer soft keyPlace Call onHold• With call in progress, press the Hold Button• Line Button flashes with green light